14 Sep 2026 • 5 mins read
Bambu Studio has floating regions: how to fix
The floating regions warning after slicing has two separate causes: a genuine island, or an element in the model that never touches the base. How to tell.
Tag: print orientation
How a model sits on the plate decides supports and surface quality. Rotating and laying flat, adding supports, and fixes for failing overhangs.
1 Sep 2026 • 6 mins read
How to add supports in Bambu Studio: 3 methods
What to do when support painting does nothing. The three support methods, how the enforcer cube works, and how to avoid needing support at all.
1 Sep 2026 • 5 mins read
Bambu Studio: rotate, scale and mirror a model
Mirror hides in the right-click menu, not the toolbar. Rotating, scaling, laying a chosen face on the plate, and how orientation decides print quality.
1 Sep 2026 • 6 mins read
3D print overhangs: fixing droop without support
Droop, blobs and rough undersides where the print runs over air. Cooling, the 45-degree rule, bridges versus overhangs, and fixes that beat adding support.
Posts published
55