Projects

Parts whose drawings I share, and how they were made. Dimensioned images, print settings and assembly steps.

Sort by:

25 Jul 2026 • 6 mins read

Modular filament spool holder

A bearing-mounted holder that clips together side by side. Prints in one piece with no supports; dimensioned drawing and assembly order inside.

Enes Aydın

11 Jul 2026 • 8 mins read

A channel that gathers the harness swinging behind the gantry. Print orientation and wall count chosen to stop it flexing.

Selin Arda

27 Jun 2026 • 14 mins read

One parameter table drives compartment count and depth. Every sketch constraint is walked through screen by screen.

Enes Aydın

19 Jun 2026 • 7 mins read

Measured slots for pliers, cutters and a spatula. The rail is standard, so adding a holder means printing one more piece.

Mert Uslu

2 Jun 2026 • 5 mins read

A short duct with an expanding cross-section noticeably drops the whine of a 40 mm fan. With before and after decibel readings.

Enes Aydın

24 May 2026 • 4 mins read

A small part carrying hole, boss and clearance tolerances. Opening a new filament, it tells you where you stand in five minutes.

Selin Arda